Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Concord
If you heat your home with wood in Concord, your chimney works harder than the one in a Boston condo or a coastal cottage. Concord winters run long and cold, and a chimney that’s asked to carry smoke from October through April needs a real cleaning, not a quick brush-and-go. We drive up from Manchester to Concord regularly and know what we’re walking into: 1890s masonry in the West Concord blocks, prefab metal flues in the outer wards, and the coal-to-wood conversions that hide in plain sight downtown.

We handle the full job: Level 1 and Level 2 inspections, creosote and soot removal, annual sweeps, fireplace cleaning, and the liner work that comes up more often in this city than most. Call (888) 804-9712 to book. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Concord Homeowners Call Manchester Chimney Cleaning for Chimney Sweep
We’re based in Manchester and have served the region since 2012. Concord sits close enough that we’re there routinely, and far enough that we’re not the fly-by-night crew that shows up once and vanishes. Our reputation in this city is built on doing the sweep, showing you what we found on camera, and then fixing it with materials that hold up for twenty winters.
What sets us apart from a sweep-only outfit is the materials shelf. We stock and are trained on six professional-grade product lines – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – so when we tell you the flue needs a liner, we can install it with the same materials certified technicians use industry-wide. No handoff to a second contractor. No generic substitutes. One crew, one call.
Concord homeowners tell us the same thing: they want one specialist who shows up consistently and knows the local housing stock. That’s exactly what we build. The old brick stacks downtown, the 1960s – 1990s colonials in the 03303 outer wards, the gas inserts in mid-century capes – we see all of it on the same schedule and can plan the work around what each chimney actually needs.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Sweep Certified in Concord
Chimney Sweep Certified work in Concord means more than a brush on a rod. Here we’re dealing with 130-year-old brick chimneys converted from coal to wood, prefab metal flues in newer colonials, and everything in between, so the certification is really about knowing what to check before you clean. A typical annual sweep in Concord runs $150 – $250 depending on access and creosote load, and a Level 2 inspection – the camera-and-video assessment a sale, a liner install, or an appliance change requires – runs $250 – $450. The written estimate sets the final price.
What a Sweep Involves
We start at the firebox and work up, brushing the flue from the top with the proper poly or wire brush for the material, then vacuum the firebox and smoke chamber down to bare brick. A ground-level camera inspection is standard, so you see what we see. We never recommend a liner or masonry repair without video evidence in your hands.
When to Book One
For an actively used wood-burning chimney, once a year is the baseline, and Concord’s heating seasons push that toward the strict end. If your stove or fireplace has run all winter, book before the next burning season starts. If creosote has been building for a few years and it’s been a while, book now – we’d rather find it in June than January.
Gas Fireplace Cleaning in Concord
Gas Fireplace Cleaning in Concord isn’t just a wipe-down. A gas insert or vented fireplace pulls combustion byproducts and dust through the vent, and the ceramic logs, burner ports, glass, and flue all need attention on a schedule. A typical gas fireplace cleaning in Concord runs $175 – $300. That covers the log and burner cleaning, glass cleaning, port cleaning for even flame, and vent inspection so you’re not venting into a blocked or degraded flue.
Why Even Gas Fireplaces Need Cleaned
People assume gas means nothing to clean. But the venting still carries soot, dust, and moisture from the burner, and the ceramic logs will collect debris that changes the flame pattern. In a Concord home where the fireplace is used through winter, an annual cleaning keeps combustion clean and the flame where it should be.
What We Check on the Vent Side
For vented gas, we inspect the flue and termination for birds, nests, and blockages. In Concord’s older homes, gas inserts were often squeezed into flues that were designed for something else, and the fit matters. We look, we show you the photo, and we tell you honestly if it’s fine or if it needs attention.

Trusted Brands We Service in Concord
We stock parts and materials for Concord customers from DuraFlex, HeatShield, Olympia Chimney, and Gelco, so we’re not waiting three weeks for a liner to arrive when your flue needs one before winter. DuraFlex flexible liner systems retrofit older or complex flues where rigid pipe won’t bend – a distinction that matters in the granite-and-brick downtown, where a straight shot up the flue often isn’t the reality. HeatShield liner restoration lets us rebuild a damaged flue when a full reline isn’t the only answer, and it’s an option most sweep-only competitors don’t have. Olympia Chimney and Gelco materials round out the shelf. We stock locally for Concord because a stalled job in September means a stalled stove in November.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Concord Homes
- Coal-to-wood conversions with no liner. In West Concord and the downtown blocks, chimneys originally built for coal furnaces were tapped for wood stoves, leaving unlined or single-wythe brick flues. Creosote accumulates directly on brick in that setup, and a stainless liner is the fix – before another winter of burning.
- Freeze-thaw spalling on exterior masonry. Concord’s cold, snowy winters cycle exterior brick through freeze and thaw from October through April. That cracks crowns and mortar joints, which lets water in and further degrades both the masonry and the flue tiles behind it.
- Aged prefab metal flues in 1960s – 1990s colonials. The 03303 outer wards have colonials and capes with factory-built fireplaces whose metal flues are now older than the design life. Gaps develop at joints, and creosote can hide behind the firebox where a casual sweep won’t reach.
- Shoulder-season cold-flue reverse draft. In Concord, the fall and spring shoulder weeks are mild enough that the flue stays cold, and smoke rolls back into the room on startup. It’s usually a simple fix, but worth a camera look to rule out a partial blockage.
Pricing for Chimney Sweep in Concord, NH
Chimney pricing in Concord runs slightly above the regional average because the housing stock is older and the jobs are messier. A typical annual sweep runs $150 – $250. A Level 1 inspection is bundled into the sweep at no extra charge. A Level 2 camera inspection, which is what we’d recommend for a coal-to-wood conversion, a home sale, or an appliance change, runs $250 – $450. Creosote and soot removal on a heavily loaded flue adds $100 – $250 depending on the severity and how much glazed creosote has to be worked loose. Fireplace cleaning (firebox, smoke chamber, damper) adds $75 – $150 to a sweep. Gas fireplace cleaning runs $175 – $300.
What drives the range: chimney height and roof access, whether the flue has straight or offset geometry, how loaded the creosote is, and whether we have to remove a cap or top-seal. The estimate is free, the price is set per job in writing, and nothing gets added after we start. Call (888) 804-9712 for an exact quote.
We Also Serve Cities Near Concord
We book sweeps and repairs in Suncook, Henniker, Hooksett, and Goffstown alongside our work in Concord. If you’re on the outskirts and not sure whether you’re in our dispatch range, call and we’ll tell you straight. Same materials, same camera inspection, same written estimate wherever we go. Our chimney sweep team covers the whole Merrimack Valley corridor from the Manchester base.
Serving Concord, NH – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Concord
Yes, in almost every case you do, and we won’t tell you otherwise without a camera inspection. A coal flue was designed for a fuel that burned hot and clean with almost no creosote. Wood burns cooler and wetter, and creosote deposits directly on unlined brick or single-wythe joints, which is both a fire risk and a slow path to mortar failure. We run a camera down the flue, show you the video, and then discuss whether a HeatShield restoration or a DuraFlex stainless liner is the right fix. Call (888) 804-9712 for an exact quote – estimates are free.
Once a year for a chimney that burns regularly. Concord’s heating degree days run high enough that most active wood burners are pushing real creosote accumulation by the end of the season, and a mid-season sweep for a heavy burner isn’t unusual. Book in the late summer or early fall so you’re ahead of the burning season. Call (888) 804-9712 for an exact quote – estimates are free.
First-degree is the light, flaky soot you can brush off – routine sweep territory. Second-degree is tar-like and harder to remove. Third-degree is glazed and hardened onto the flue surface, and it takes real work to remove without damaging the tile or brick. Third-degree creosote is what we found on a 1920s brick home off Pleasant Street in downtown Concord, where a single-wythe chimney with no liner was serving a wood stove. We ran the camera, showed the homeowner the cracked mortar joints and the glaze, and installed a HeatShield liner to restore safe draft. If you suspect glazed creosote, don’t test it with a brush yourself. Call (888) 804-9712 for an exact quote – estimates are free.
Sometimes yes, sometimes it’s a liner or flue repair. Weak draft in an aged prefab usually comes from one of three things: a partial blockage (nest, soot), gaps at flue joints that let cool air in and dilute the draft, or a flue that was always marginal and has now aged out. A camera inspection tells us which one. If it’s a simple blockage, the sweep fixes it. If it’s joint gaps or a failed flue, we quote the repair with DuraFlex or Olympia Chimney materials. Call (888) 804-9712 for an exact quote – estimates are free.
Yes. Gas fireplace cleaning in Concord is a scheduled service for us, not an afterthought. We clean the ceramic logs, burner ports, and glass, inspect the venting for blockages or degraded flue joints, and check the flame pattern so combustion stays clean. A typical gas fireplace cleaning runs $175 – $300. If your insert hasn’t been touched in a few years, it’s worth booking. Call (888) 804-9712 for an exact quote – estimates are free.
Concord’s older chimneys deserve a technician who shows the evidence before recommending a repair. That’s the whole standard we hold to here. Camera first, quote second, work third. Call (888) 804-9712 for a free estimate on a sweep, inspection, or repair at your Concord home. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by Tim Sandoval, Owner at Manchester Chimney Cleaning, serving Concord since 2012.