Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Manchester?
Chimney liner work in Manchester typically runs $2,400 to $6,800 for a full stainless reline, while a HeatShield restoration of an existing liner usually lands between $1,200 and $2,600. A partial chimney rebuild on a Manchester home generally costs $3,500 to $9,000, and a full rebuild from the roofline up can reach $12,000 or more. Those ranges cover the material and labor for a typical single-flue house; your written estimate sets the final price.
Manchester’s older housing stock is the reason these numbers matter here more than in newer markets. Plenty of homes around the North End and Garland Street were built when flues were lined with clay tile set directly into brick, and a century of freeze-thaw winters has a way of opening gaps in that tile. A liner that was fine in 1950 isn’t necessarily fine now, and the honest answer to “do I need a new liner” comes from looking at the flue, not guessing over the phone.
We handle the whole arc here: inspection, cleaning, and the repair that follows, using professional-grade materials. When you call Manchester Chimney Cleaning, you get one crew that identifies the problem and fixes it, rather than a sweep who hands you a report and a second contractor who shows up weeks later.
Chimney Liner & Rebuild Cost Breakdown (2026)
These are typical estimated ranges for the Manchester, NH market in 2026. What you actually pay depends on flue size, liner length, access, and how much masonry has to come out. The written estimate you get after we inspect the flue is the price.
| Line Item | Typical Estimated Range |
|---|---|
| Level 2 inspection (camera, full flue) | $175 – $400 |
| Standard chimney sweep | $150 – $300 |
| HeatShield liner restoration (cast-in-place) | $1,200 – $2,600 |
| DuraFlex stainless flexible reline, single flue | $2,400 – $6,800 |
| Insulation wrap added to a new liner | $300 – $800 |
| Top plate, cap, and crown | $350 – $1,100 |
| Partial rebuild (upper courses, above roofline) | $3,500 – $9,000 |
| Full chimney rebuild (roofline down to firebox) | $12,000 – $25,000+ |
| Flue tile crack repair (spot) | $400 – $900 |
| New stainless cap and spark arrestor | $200 – $500 |
The single biggest cost driver is whether the flue can be restored or has to be relined. HeatShield is a cast-in-place liner restoration product: we apply it to the inside of an existing flue to seal cracks and rebuild a smooth surface, and it costs considerably less than tearing out what’s there. Not every flue qualifies. If the tiles are separated or the flue profile is irregular, a DuraFlex flexible liner is the better path, and it’s built to snake through offset and older chimney configurations where a rigid liner simply won’t go. Both are materials we keep in the shop and are trained on, alongside Gelco, Olympia Chimney, Famco, and Copperfield.
Rebuild work is priced by the amount of masonry that comes out and goes back in. Repointing a crown and replacing the top few courses is one number. Taking a chimney down to the firebox and rebuilding it in kind is another entirely. The good news is that most Manchester chimneys we look at don’t need a full rebuild. A cap, a crown, a liner, and maybe a few courses at the top usually get a chimney back to safe and functional.
What Affects Chimney Liner & Rebuild Pricing in Manchester
- Flue height and rooftop access. A tall chimney on a steep Victorian roof around the North End takes more staging, more ladder time, and more material than a low flue on a ranch. Height drives the liner length, and liner is priced by the foot.
- Flue condition. Cracked tiles, gaps at the joints, and heavy creosote glaze all change the plan. A flue that needs a full reline won’t get by with a restoration, and vice versa. The inspection tells us which way it goes.
- Appliance type. A wood stove and a gas insert need different liner systems and different venting. Gas appliances vent differently than wood, and a high-efficiency appliance may need insulation around the liner to perform correctly in cold weather.
- Manchester winter and freeze-thaw. Our climate works masonry hard. Water gets into the brick and crown, freezes, expands, and pops the surface off a little more each season. Chimneys that lack a proper cap and a sound crown age faster here, and that shows up as more rebuild work.
- Number of flues. A two-flue chimney that served a fireplace and a furnace might need both lined or one abandoned. Each flue is priced separately.
- Masonry scope. Pointing, crown repair, and top-course replacement are add-ons to the liner job. Doing them in the same visit is more efficient than a separate trip weeks later.
If you’re in an older Manchester neighborhood, an inspection is the place to start. We work throughout Manchester and can look at the flue, tell you what condition it’s in, and give you a written estimate rather than a ballpark over the phone.
Restoration vs. Full Reline: Which Costs Less in Manchester?
Restoration almost always costs less than a full reline, and it’s the option worth asking about first. HeatShield liner restoration generally runs $1,200 to $2,600 in Manchester, while a DuraFlex stainless reline runs $2,400 to $6,800. The difference matters, and most sweep-only crews can’t offer you the cheaper path because they don’t carry the materials.
Restoration isn’t right for every flue. It works when the existing clay tile is largely intact but has cracks, gaps, or a rough interior that’s letting creosote and moisture through. It doesn’t work when tiles are badly separated, the chimney has shifted, or the flue is oversized for the appliance. That’s when a flexible liner is the correct answer, and DuraFlex is built for exactly the older and irregular flues we see around the city.
Here’s the decision in plain terms: if the flue can be restored, restore it. If it can’t, reline it. Done right, either one gets you a safe, properly vented chimney. What you don’t want is to pay for a reline when a restoration would have done the job, or to restore a flue that should have been relined. That’s why the inspection comes first, and why we do the inspection and the repair in-house.
How to Save on Chimney Liner & Rebuild in Manchester
- Get the inspection before anything else. A Level 2 camera inspection at $175 to $400 tells you what the flue actually needs. Skipping it and guessing can cost you thousands in the wrong direction.
- Ask about restoration. If the flue qualifies for HeatShield, it saves you $1,000 or more over a full reline. Ask directly whether your flue is a restoration candidate.
- Bundle the small stuff with the big job. Adding a cap, crown repair, or top-course replacement to a liner job costs less than booking them separately.
- Keep up the annual sweep. A routine cleaning at $150 to $300 catches problems while they’re still cheap to fix. Creosote left to build up means more than cleaning later. It can mean a liner.
- Don’t skip the cap. A proper stainless cap keeps rain, snow, and animals out of the flue. In Manchester’s freeze-thaw winters, that adds real life to a chimney.
Estimates are free, and that’s true for restoration, reline, and rebuild alike. Call (888) 804-9712 for a free estimate and we’ll get eyes on the flue before you commit to a number.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Manchester, NH?
A full stainless chimney liner in Manchester typically costs $2,400 to $6,800 for a single flue, and a HeatShield liner restoration runs $1,200 to $2,600. The range depends on flue height, condition, and whether insulation wrap is added. Call (888) 804-9712 for an exact quote; the estimate is free.
Is it cheaper to restore my lining or replace it?
Restoration is usually cheaper: $1,200 to $2,600 versus $2,400 to $6,800 for a full reline. Whether your flue qualifies for restoration depends on the condition of the existing clay tile, which we check with a camera inspection. Call (888) 804-9712 and we’ll tell you which option fits your flue.
How much does a chimney rebuild cost in Manchester?
A partial rebuild above the roofline typically runs $3,500 to $9,000, and a full rebuild from the roofline down to the firebox runs $12,000 to $25,000 or more. The difference is how much masonry comes out. Call (888) 804-9712 for a free estimate before you plan on a full rebuild, because many chimneys only need upper courses and a crown.
Can a chimney liner be repaired instead of replaced?
Yes, in many cases. HeatShield cast-in-place restoration can seal cracks and rebuild a smooth flue surface without a full reline, at $1,200 to $2,600 versus $2,400 to $6,800. It only works when the tile is largely intact, so an inspection comes first. Call (888) 804-9712 to find out whether your flue qualifies.
Does a chimney rebuild include a new liner?
Not automatically, and you should ask before you sign. A full rebuild often includes a new liner because the old one comes out with the masonry, which is why a rebuild runs $12,000 and up. A partial rebuild usually does not. Call (888) 804-9712 and we’ll spell out what’s included in your written estimate.
Do you work on dryer vents too?
Yes. Alongside chimney work, we clean and repair dryer vents using Famco purpose-built products, so both of a home’s fire-risk flues are handled by one crew in one relationship. Call (888) 804-9712 for pricing on the vent side.
What Happens When You Call
You call, we listen to what the fireplace or stove has been doing, and we book an inspection. On site, we camera the flue, check the cap and crown, and note any masonry issues. From there we hand you a written estimate covering the liner or rebuild work, with the restoration option shown alongside the reline where it applies. You decide. We schedule the job and do it with professional-grade materials: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, or Copperfield, whichever suits the flue.
One crew, one call, from annual sweep to full liner restoration. That’s what we’re built for in Manchester, and it’s how we’ve run since 2012.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed on Saturday; a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Same-day service is often possible.
Call (888) 804-9712 for a free estimate. Tell us your neighborhood and what the fireplace has been doing, and we’ll take it from there.
Pricing reflects the Manchester market as of 2026. Manchester Chimney Cleaning offers free estimates – call (888) 804-9712.
Written by the team at Manchester Chimney Cleaning, serving Manchester since 2012.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Travis Rhodes"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Ryan Ackerman"Second time using them. Same guy, same good work."
- Jeff Brooks