Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Manchester?
Chimney repair in Manchester, NH typically costs $300 to $1,100 for most common jobs, and a chimney liner restoration with HeatShield generally runs $1,200 to $2,600. A full stainless reline with DuraFlex lands higher, usually $2,800 to $5,800. Those ranges cover the work most Manchester homeowners actually face: a cracked crown, a spalling brick face, a failed flue liner, or a leak at the flashing. The written estimate sets the final price, and we don’t quote a job until we’ve looked at the flue properly.
Key Takeaways
- Typical Manchester chimney repairs run $300 to $1,100; liner work runs $1,200 to $5,800 depending on method.
- The age and brick type of Manchester’s older housing stock is the single biggest cost driver.
- Estimates are free, and we identify the problem and fix it under one roof: no handoff to a second contractor.
- One crew, one call handles both your chimney flue and your dryer vent.
Chimney Repair Cost Breakdown (2026)
Here’s what the individual pieces of a chimney repair tend to cost in the Manchester market this year. These are typical estimates, not fixed prices. Treat them as a way to sanity-check a quote, then let the on-site written estimate settle the number for your house.
| Repair item | Typical cost range | What it covers |
|---|---|---|
| Chimney inspection | $0 to $150 | Visual and flue assessment; often free when bundled with a repair. |
| Crown repair or recrowning | $350 to $700 | Sealing cracks or rebuilding the concrete crown that sheds water off the top. |
| Crown rebuild (full) | $700 to $1,100 | Removing a failed crown and pouring a new one with proper overhang. |
| Tuckpointing / brick repointing | $300 to $900 | Grinding out and replacing mortar joints that have gone soft or crumbly. |
| Flashing repair | $300 to $650 | Resealing or rebuilding the roof-to-chimney joint where leaks start. |
| Smoke chamber / damper repair | $400 to $900 | Fixing a damaged smoke shelf or a damper that won’t close tight. |
| HeatShield liner restoration | $1,200 to $2,600 | Resurfacing a sound but cracked clay flue, restoring it instead of relining. |
| Full stainless reline (DuraFlex) | $2,800 to $5,800 | New flexible liner for a failed or oversize flue, including complex routing. |
| Firebox rebuild | $900 to $2,400 | Rebuilding cracked firebox brick and the mortar around it. |
| Chimney cap with screen | $175 to $450 | Cap and spark screen to keep weather, animals, and debris out of the flue. |
What pushes a job toward the top of a range comes down to access and condition. A chimney that’s easy to reach and needs one repair sits low. One with a soft crown, crumbling mortar, and a flue that’s failed along its whole length sits high, because you’re paying for three repairs, not one. On a two-story home, the labor to reach the top and set up safely adds to the bill, and a flue with an odd bend or an offset challenges a rigid approach. When the flue is too tight or too crooked for a rigid liner, a flexible liner is the practical fix, and that’s the kind of job where DuraFlex systems earn their keep.
What Affects Chimney Repair Pricing in Manchester
Two houses on the same street can come in at very different numbers. These are the factors that move the price most in this market.
- Age and brick condition of the house. Manchester has a lot of older homes where the masonry itself has taken decades of freeze and thaw. A chimney built into a home that’s seen a hundred winters will usually need more than a newer one. Once mortar goes soft, a small crack becomes a spalled face, and the count of things to fix grows. Brick that still has its hard face and tight joints often needs only the one repair that brought us out.
- Freeze-thaw weather. A New Hampshire winter drives water into masonry, it freezes, expands, and opens tiny cracks that refill the next time it rains. That cycle is why crowns and flashing fail here more than in warmer climates. A crown that cracks this way lets water into the chimney body, and what starts as a crown fix can become brick and firebox work if it’s left long enough.
- Which flue is failing and over what length. A short crack near the top is a small job. A flue that’s degraded from top to bottom means a full reline, and the cost scales with the length of the run and how hard it is to route a liner through it.
- Restoration versus replacement. When the clay flue is sound but has cracks, a HeatShield restoration re-coats it and keeps the original tile in place. That’s materially cheaper than tearing it out for a full stainless reline. A sweep-only crew that doesn’t carry HeatShield has to sell the more expensive option, which is a big part of why restoration matters here.
- Height, access, and roof pitch. A steep roof, a chimney tucked behind a dormer, or a run that needs scaffolding all add labor to a job. Access is a real cost on a Manchester roofline, not a formality.
- The appliance feeding the flue. A wood stove, gas insert, and an open fireplace all call for different liner sizing and different venting standards. A gas appliance with the wrong liner, or a wood stove overfiring a too-small flue, can mean the existing setup has to be corrected, and that adds steps to the job.
If you want a clear picture of how our Manchester Chimney Cleaning team handles a repair from inspection through completion, that’s the place to start. We work with six professional-grade product lines, including HeatShield, DuraFlex, Gelco, Olympia Chimney, Famco, and Copperfield, so the repair is done with the same materials certified technicians use across the industry, not a generic substitute. That single detail changes the price conversation, because it means we can match the fix to the flue instead of forcing one method on every job.
How to Save on Chimney Repair
The most reliable way to keep a chimney repair bill down is to fix the small thing before it becomes the big thing. A crown crack that costs a few hundred dollars to seal can, if ignored through a few Manchester winters, turn into brick work and firebox repair that runs several times that. Catching it early isn’t a sales pitch; it’s how the math actually works.
- Get an inspection before the season starts. A free or low-cost inspection finds the failing crown or the cracked flue tile while it’s still a simple repair. Waiting until smoke backs into the room usually means the problem has spread.
- Ask whether restoration will work. If the flue is sound but cracked, ask specifically about HeatShield liner restoration. A contractor who doesn’t carry it will only offer the full reline, and that’s the more expensive path.
- Bundle the small repairs. A cap, a crown seal, and flashing repair done in one visit share the labor to get up on the roof. Doing them three separate times pays that access cost three times.
- Address the dryer vent too. A clogged dryer vent is the other leading fire-hazard flue in most homes, and having both handled in one visit means one service relationship instead of two. We use Famco dryer vent products built for the job, not improvised parts.
- Get the estimate in writing and compare apples to apples. A quote that names the method, the material, and the scope is the only fair way to compare two bids. Estimates from us are free, and the written estimate sets the final price.
Call (888) 804-9712 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, so we can look at the chimney and give you a number you can plan around.
Why Professional-Grade Materials Matter to the Price
Material choice is one of the quiet line items in any chimney repair, and it’s where a cheap bid and a sound bid often split. A generic liner or an off-brand cap may cost less up front, but it changes how long the repair lasts and whether the next contractor can even service it. We stock and are trained on six professional-grade product lines for exactly this reason.
Olympia Chimney and Copperfield products give us the supply depth to size a job properly rather than forcing the closest available part. Gelco products handle the day-to-day repair components. HeatShield lets us restore a failing clay flue instead of replacing it. DuraFlex flexible liners let us retrofit flues that would defeat a rigid approach. Famco covers the dryer vent side, so that job is done with purpose-built materials too. From annual sweep to full liner restoration, the materials are consistent, and one crew sees the job through from inspection to the finished repair. We identify the problem and fix it, which is the whole point of hiring one specialist rather than juggling a sweep, a mason, and a vent company.
What Happens When You Call
You’ll talk to someone who understands chimneys, not a call center reading a script. We’ll ask what you’re seeing: smoke backing up, water stains on the ceiling near the chimney, a damper that won’t close, crumbling mortar on the outside, or a dryer that takes two cycles to dry a load. That conversation usually points to the likely repair and a rough starting range before anyone comes out.
Then we schedule a visit, look at the flue and the masonry, and put the findings and the price in writing. If the job calls for a liner restoration or a reline, that’s within what we do. If it’s a crown or flashing repair, same crew, same materials. You won’t be handed off to a second contractor halfway through. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. You can also read more about our work across Manchester if you want context on how we operate locally.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Manchester?
Most chimney repairs in Manchester run $300 to $1,100, with liner work from $1,200 for a HeatShield restoration up to about $5,800 for a full DuraFlex stainless reline. The written estimate sets the final price once we’ve seen the flue. Call (888) 804-9712 for a free estimate.
Is it cheaper to repair my chimney or replace the liner?
If the clay flue is sound but cracked, restoration is cheaper: a HeatShield restoration at $1,200 to $2,600 beats a full reline at $2,800 to $5,800. Once the flue is badly spalled or the wrong size for the appliance, a reline is the correct fix and restoration won’t hold. An inspection tells you which situation you’re in. Call (888) 804-9712 to get that answer in writing.
How much does a chimney crown repair cost in Manchester?
A crown repair runs $350 to $700, and a full crown rebuild runs $700 to $1,100. Cracks in the crown are among the most common water-entry points on a New Hampshire chimney, so catching one early saves money. Call (888) 804-9712 for a free estimate on your crown.
Can you fix my chimney the same day?
Small repairs like a cap, flashing reseal, or crown patch can often be handled on the first visit; larger jobs like a reline get scheduled once the estimate is set. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. Call (888) 804-9712 to find the next opening.
Do I need a chimney inspection before getting a repair price?
Yes, a proper inspection is what makes a real price possible, and it’s often free when bundled with the repair. Without looking at the flue and the masonry, any number is a guess. Call (888) 804-9712 to book an inspection and a written estimate.
Why does my chimney repair cost more than my neighbor’s?
Condition and access drive the difference: a home with a soft crown and a full-length flue failure costs more than one with a single crack. Manchester’s older housing stock and the freeze-thaw cycle here push many chimneys into the higher range. A free estimate tells you where yours falls. Call (888) 804-9712.
Get a Real Number for Your Chimney
Chimney repair prices in Manchester are all about what’s actually wrong with the flue and the masonry, which is why a written estimate beats any online guess. We identify the problem and fix it with professional-grade materials, so you’re not pricing the same job twice. Call (888) 804-9712 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Manchester market as of 2026. Manchester Chimney Cleaning offers free estimates, call (888) 804-9712.
Written by the team at Manchester Chimney Cleaning, serving Manchester since 2012.
What Our Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Renee Gallagher"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Dustin Anderson"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Jason Bennett