Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning & Sweep Cost in Manchester?
A standard chimney sweep in Manchester typically runs $185 to $325, and a sweep combined with a Level 2 video inspection usually lands between $275 and $475. Those figures cover a normal flue in working order. If the inspection turns up creosote glaze, a cracked liner or a blocked cap, the repair line on the estimate is what moves the total, and that’s where a sweep-only crew has to hand you off to someone else. We don’t. Manchester Chimney Cleaning handles the sweep, the inspection and the repair with our own crew.
What you’ll pay depends on the fuel you burn, the condition of the flue, and how long it’s been since anyone looked at it. This guide breaks down the 2026 ranges line by line so you can read an estimate and know what each number is for.
Key takeaways
- A basic sweep is typically $185-$325; a sweep with a Level 2 inspection is $275-$475.
- HeatShield liner restoration often costs less than a full reline – it’s an option many sweep-only outfits can’t offer.
- Dryer vent cleaning is $125-$225 and addresses the second fire-risk flue in most Manchester homes.
- Estimates are free, and the written estimate sets the final price.
Chimney Cleaning & Sweep Cost Breakdown (2026)
Here’s how the numbers break out for the Manchester market. These are typical ranges, not a quote. Your written estimate is the price that counts.
| Service | Typical range | What it covers |
|---|---|---|
| Standard chimney sweep | $185 – $325 | Rod-and-brush cleaning of the flue, firebox and smoke chamber; removal of soot and creosote. |
| Sweep + Level 2 video inspection | $275 – $475 | Full sweep plus a camera run through the flue to check liner joints, offsets and the cap. |
| Wood stove or insert sweep | $225 – $375 | Disassembly around the stove pipe, cleaning of the connector and flue, reassembly. |
| Gas insert or gas fireplace service | $175 – $295 | Cleaning of the firebox and venting, check of the termination and draft. |
| Dryer vent cleaning | $125 – $225 | Full-length lint removal from the vent run, plus a check of the exterior termination. |
| HeatShield liner restoration | $1,200 – $2,600 | Resurfacing of a cracked or pitted clay liner instead of a full reline. |
| DuraFlex flexible liner installation | $2,400 – $5,200 | New stainless liner for older or complex flues where a rigid liner won’t fit. |
| Chimney cap and crown repair | $275 – $1,100 | Replacement cap, crown sealing or rebuild of a cracked crown. |
| Masonry repointing or tuckpointing | $600 – $2,800 | Repair of deteriorated mortar joints in the stack above the roofline. |
Two things push a Manchester sweep toward the top of that range. The first is fuel type. A wood-burning appliance that’s seen heavy use builds creosote faster, and glazed creosote takes longer to remove. The second is access. A flue with offsets, a tight smoke chamber or a liner that’s been patched before all slow the job down. Gas appliances clean faster and usually sit at the lower end. Homes that have never had a professional assessment often turn up something on the inspection – a missing cap, a cracked crown, a liner joint that’s separated – and that’s when the estimate grows beyond the sweep itself. We identify the problem and fix it, so you’re not left holding a report and a phone number for someone else.
What Affects Chimney Cleaning & Sweep Pricing in Manchester
Manchester’s housing stock does a lot to shape these numbers. A good share of the city’s homes date to the late 1800s and early 1900s, when fireplaces were built for coal and later converted to wood or gas. Those flues were sized for a different fuel, and the liners inside them are often clay tile that’s been through a century of heating and freezing. A sweep on a flue like that takes longer and the inspection matters more.
- Fuel type and creosote stage. Wood produces creosote; the harder, glazed stages take more time and sometimes chemical treatment to remove. Gas and pellet appliances leave far less behind, which keeps the sweep at the lower end.
- Flue configuration. A straight flue cleans quickly. Offsets, a rear vent, or a flue that’s been relined before all add time. This is exactly where DuraFlex flexible liners earn their keep on a repair – they fit where a rigid liner won’t.
- How long it’s been since the last sweep. A flue cleaned annually is a straightforward job. One that hasn’t been touched in several years means more buildup and a longer inspection.
- New Hampshire winters. Freeze-thaw cycles work on masonry mortar and crown joints. Cracks that open over winter let water in, and water plus soot is a repair waiting to happen. Expect the inspection to flag crown and cap issues more often on older Manchester stacks.
- Roof access and height. A two-story colonial with a steep pitch takes more setup than a ranch. Height and pitch affect labor time, and that shows up in the estimate.
- Whether repair is needed. The sweep itself is the smaller number. The inspection is what tells you if a restoration or liner job is on the table, and that’s the line item that changes the total.
How to Save on Chimney Cleaning & Sweep
There’s no coupon needed here – the savings come from timing and from catching things early.
- Sweep before the heating season, not during it. Booking a sweep in the warmer months means the job is scheduled without the fall rush, and you have time to plan any repair rather than react to it.
- Ask about HeatShield before you agree to a full reline. A cracked clay liner doesn’t always mean a new liner. HeatShield restoration resurfaced the existing flue and often costs less than replacement. It’s a repair option most sweep-only outfits can’t provide, so it’s worth asking about directly. A Manchester Chimney Cleaning estimate will tell you which path fits your flue.
- Bundle the dryer vent. If we’re already at the house for the chimney, adding dryer vent cleaning keeps it to one visit. Famco dryer vent products mean the termination and fittings get fixed properly, not improvised.
- Catch small repairs early. A crown that gets sealed now is cheaper than a crown rebuild later. Water is the slow enemy of masonry, and Manchester’s freeze-thaw pattern gives it plenty of chances.
- Get the inspection on the first visit. Skipping the Level 2 video inspection saves a little now but often hides a liner problem that costs more to fix once it’s spread.
Estimates are free, so there’s no reason to guess. Call (888) 804-9712 and we’ll set up a time to look at your flue and put the numbers in writing.
Why Material Choice Changes the Price – and the Outcome
A sweep is a service. A repair is a materials job, and the materials are where cheap work shows up later. We’re stocked and trained on six professional-grade product lines: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield. That matters because a liner installed with the same materials certified chimney technicians use industry-wide behaves the way it’s supposed to. Generic substitutes don’t.
The practical difference is that we can match the material to the flue instead of forcing one product onto every job. Older Manchester flues that are out of square, offset, or too tight for a rigid liner get a DuraFlex flexible system. A flue with a sound structure but a deteriorating clay liner gets HeatShield restoration. Copperfield and Olympia Chimney access gives us the supply depth to finish a job without waiting on a special order, and Gelco and Famco cover the venting and dryer side of the house. One crew, one call, from annual sweep to full liner restoration.
That full arc is the reason we handle Manchester homes end to end. If the inspection finds a problem, we’re the ones who fix it, and you’re not scheduling a second contractor for the repair.
FAQs – Chimney Cleaning & Sweep Cost
How much does a chimney sweep cost in Manchester, NH?
A standard chimney sweep in Manchester typically costs $185 to $325. Add a Level 2 video inspection and the range moves to $275 to $475. Gas appliances usually land at the low end; wood appliances with heavy creosote sit higher. Call (888) 804-9712 for an exact quote – estimates are free.
Is it cheaper to repair my chimney liner or replace it?
Often repair is cheaper. HeatShield liner restoration typically runs $1,200 to $2,600, while a full DuraFlex reline runs $2,400 to $5,200. Which one applies depends on whether the clay liner is structurally sound enough to resurface. A camera inspection answers that before you commit. Call (888) 804-9712 and we’ll walk you through both numbers for your flue.
How much does dryer vent cleaning cost in Manchester?
Dryer vent cleaning typically costs $125 to $225. A long or clogged vent run sits at the top of that range. Cleaning the dryer vent alongside a chimney sweep keeps it to one visit. Most homes have two fire-risk flues, and this one is easy to forget. Call (888) 804-9712 to add it to your estimate.
Can you come out the same day?
Same-day service is often possible depending on the schedule. Call (888) 804-9712. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Do I really need a sweep every year?
Annual sweeping is the standard recommendation for a wood-burning appliance, and it keeps a routine sweep in the $185 to $325 range rather than a larger repair bill. Gas and pellet appliances can stretch the interval, but an inspection still matters, especially in older Manchester homes with clay liners that have seen decades of freeze-thaw. Call (888) 804-9712 to book an assessment.
What the Estimate Actually Covers
An estimate from us isn’t a flat number for “a cleaning.” It’s a line-by-line read of your flue: the sweep, the inspection, and any repair the inspection turns up. You’ll see what each item costs before anyone starts work, and the written estimate sets the final price. Nothing gets added on the day without your say-so.
That’s a different experience from calling a sweep-only crew that cleans the flue, hands you a report, and tells you to find a mason for the crown and a liner specialist for the flue. With three services under one company – chimney sweep, dryer vent cleaning, and chimney repair – the problem gets identified and fixed by the same people.
One safety note worth stating plainly: creosote buildup and a damaged liner are the two things a sweep is meant to catch, and both are serious. A flue fire is not something to gamble on, and a cracked liner lets heat and gases reach the framing. That’s why we encourage a professional assessment rather than a DIY cleaning. A trained technician has the brushes, the camera and the safety setup to do it correctly, and can spot a hazard you can’t see from the firebox. The same goes for dryer vents, where lint accumulation is the leading cause of dryer fires. Both flues deserve a real look.
If you’re in Manchester and it’s been a while since anyone checked your chimney or your dryer vent, the first step is a free estimate. Call (888) 804-9712 and we’ll get you on the schedule. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Manchester market as of 2026. Manchester Chimney Cleaning offers free estimates – call (888) 804-9712.
What Our Customers Say
"Second time using them. Same guy, same good work."
- Jeff Brooks"Quoted me over the phone, charged me that, left. Perfect."
- Kevin Tran"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Tara Doyle